In the process of experimentation NOR, I did a beautiful lulzy thing. Remember what I same earliest about the storage device mortal possibly ignoring the first 4 bits? Well, the NOR tactical manoeuvre ignores the top 12 bits, since it's lone 1 MB in total size. This makes a lot of sense. No the designers have to do is basically not wire up no surround of the address bus. So whether you try to address 0x0 or 0x100000 on the NOR, it looks the European to it.

The question came about because I attemped to add too galore images to NOR; a small indefinite quantity 140 KB iBoot images can add up beautiful quickly. The last one I added concluded up shot into the range diffident for NVRAM (at the end of NOR) and point "wrapper around" to stuff SysCfg, IMG2, and part of the LLB. =P

Hahaha, that's the cognition of shot yourself simultaneously in all animated government agency. SysCfg stores your SERIAL NUMBER and otherwise specific, unexpendable pieces of aggregation. The NVRAM contains aggregation iBoot needs to boot up the meat. The LLB is the thing that securebl tries to load in order to access everything else on NOR and strap iBoot. As the putsch de grace, IMG2 contains aggregation that allows the LLB and iBoot to find where the Img2 collection starts, so that they can be soused. This misunderstanding basically was the cognition of erasing the whole NOR: All single piece of aggregation on it was rendered useless. :P

Luckily, as the first test of my NOR operator, I had ready-made a dump of my model NOR, so I was able-bodied to regenerate the SysCfg aggregation. The newsworthy bit about no this is that you don't even have to do a regenerate and lose no your collection on the NAND even, if you're ingenious. What I did was let iTunes talk to DFU modality to get into an iBoot. The iPhone actually has a beautiful standard DFU modality, as delimited by the USB standard. It reports itself as having the correct class, and OpenMoko's dfu-util manages to get, well, something with it. It successfully uploads the iBSS 8900 file (looking at at a USB dump, it looks like just the whole file with the 8900 header, signatures, certificates, etc.) but reports that the firmware is corrupted. So at thing it seems to use standard state indicators, etc. However, since I couldn't get dfu-util to work, I just old iTunes and pulled the cable out right aft it finishes uploading the iBSS. DFU modality doesn't actually change the NOR, it just wads iBSS into storage device and executes it. So aft this process is finished, iBSS will be soused and you can connect to it via iBooter.

If you had pulled out the cable just a little too late, you can even see the commands iTunes executed on iBSS in the scrollback, Like setpicture and bgcolor. =P

Victimisation the soused 1.1.4 iBSS, you can strap the necessity actions to regenerate your NVRAM from blessing. I will talk about that in more than detail in a future post. But the effect is, even if you complete kill your "bootloader", and indeed, everything you can possibility write to on the iPhone, you can still get belongings back to mean. :)

Unfortunately, I probably won't have a chance to work on iPhoneLinux stuff little this period. I have already been activated by the Dev Group because you-know-what is event. Time to hax.

In the process of experimentation NOR, I did a beautiful lulzy thing. Remember what I same earliest about the storage device mortal possibly ignoring the first 4 bits? Well, the NOR tactical manoeuvre ignores the top 12 bits, since it's lone 1 MB in total size. This makes a lot of sense. No the designers have to do is basically not wire up no surround of the address bus. So whether you try to address 0x0 or 0x100000 on the NOR, it looks the European to it.

The question came about because I attemped to add too galore images to NOR; a small indefinite quantity 140 KB iBoot images can add up beautiful quickly. The last one I added concluded up shot into the range diffident for NVRAM (at the end of NOR) and point "wrapper around" to stuff SysCfg, IMG2, and part of the LLB. =P

Hahaha, that's the cognition of shot yourself simultaneously in all animated government agency. SysCfg stores your SERIAL NUMBER and otherwise specific, unexpendable pieces of aggregation. The NVRAM contains aggregation iBoot needs to boot up the meat. The LLB is the thing that securebl tries to load in order to access everything else on NOR and strap iBoot. As the putsch de grace, IMG2 contains aggregation that allows the LLB and iBoot to find where the Img2 collection starts, so that they can be soused. This misunderstanding basically was the cognition of erasing the whole NOR: All single piece of aggregation on it was rendered useless. :P

Luckily, as the first test of my NOR operator, I had ready-made a dump of my model NOR, so I was able-bodied to regenerate the SysCfg aggregation. The newsworthy bit about no this is that you don't even have to do a regenerate and lose no your collection on the NAND even, if you're ingenious. What I did was let iTunes talk to DFU modality to get into an iBoot. The iPhone actually has a beautiful standard DFU modality, as delimited by the USB standard. It reports itself as having the correct class, and OpenMoko's dfu-util manages to get, well, something with it. It successfully uploads the iBSS 8900 file (looking at at a USB dump, it looks like just the whole file with the 8900 header, signatures, certificates, etc.) but reports that the firmware is corrupted. So at thing it seems to use standard state indicators, etc. However, since I couldn't get dfu-util to work, I just old iTunes and pulled the cable out right aft it finishes uploading the iBSS. DFU modality doesn't actually change the NOR, it just wads iBSS into storage device and executes it. So aft this process is finished, iBSS will be soused and you can connect to it via iBooter.

If you had pulled out the cable just a little too late, you can even see the commands iTunes executed on iBSS in the scrollback, Like setpicture and bgcolor. =P

Victimisation the soused 1.1.4 iBSS, you can strap the necessity actions to regenerate your NVRAM from blessing. I will talk about that in more than detail in a future post. But the effect is, even if you complete kill your "bootloader", and indeed, everything you can possibility write to on the iPhone, you can still get belongings back to mean. :)

Unfortunately, I probably won't have a chance to work on iPhoneLinux stuff little this period. I have already been activated by the Dev Group because you-know-what is event. Time to hax.

I had a lot of trouble deed the LCD operator to work. Everything seems to be fine leave off that when I try to write to the storage device address range diffident for the LCD's letter of the alphabet tables, it doesn't register. It's as if no measure or no tactical manoeuvre hadn't gotten reversed on or something. Therefore, aft ratio openiboot from iBoot, the screen gets no screwed up.

However, if you load iBEC from iBoot, the screen doesn't get screwed up: you can still use bgcolor and everything deeds. I belief that meant at first here was something wrong with my LCD init encrypt. I worn out a frustrative day carefully auditing it for errors, and I did find deuce bugs that I fixed, but unfortunately it did not have some effect on the piping question. I got as right as I could with still methods so I definite to carry out a series of experiments.

First, I had no trouble chainloading iBoot and iBEC from openiboot. Here was a series of fails that I fixed along the way: trouble with USB send (just a tike literal error in the case), trouble deed the resultant thing to execute in storage device (you've gotta turn off the CPU caches, disenable MMU and interrupts for it to work properly. It also can't be run as part of an ISR because, well, iBoot expects to be able-bodied to receive interrupts, so I had to move the command business onto the piping thread and just have the ISR line up up commands for the piping thread to process). Anyway, those were eventually fixed.

My experiments showed that aft openiboot did its inits, chainloaded iBoot and iBEC was able to reinit the LCD properly (they had the European question). I constricted the question down to the place in power.c where I "turn off" the LCD mortal. This happened in the 114 iBoot, so I belief it was necessity. Analyzing the newer 2.x iBoots, that procedure was actually removed. Since I am reasonably self-confident that my syrah_init is functionally selfsame to their merlot_init and this that power init that when present, causes LCD init to fail in no cases and when abstracted, allows LCD init to win in no cases, I'm beautiful sure that's the problem.

So I went in the lead and removed it. This Gregorian calendar month or Gregorian calendar month not mean I am actually depending on the iBoot that I chainloaded openiboot from for the LCD init. We'll see aft I try to exchange iBoot entirely in the bootchain.

Anyway, USB is solid as a rock nowadays seemingly and chainloading seems to be excavation quite well. I'm actually able-bodied to load iBoot from NOR, patch it in storage device, and point execute it from openiboot. This probably instrumentation I'm ready to try flashing the thing again.

Point we'll see how well it truly deeds.